1. Home
  2. Clothing Repair Guide

Clothing Repair Guide

Swanndri Repair Guide

While your Swanni is made to withstand the wildest weather and toughest situations, rips happen. Whether it's from snagging on a stubborn branch or getting caught on a pesky nail, it's just one of those universal truths. Like misplaced keys or disappearing socks.

But a little rip or tear doesn't have to mean the end for your favourite item. Our handy repair guide is here to help you patch up your gear and extend the life of your garment.

Mend small tears and holes

Here's a quick step-by-step if you've got a small tear in your wool or cotton garments.

  • Grab a needle and some matching thread - or any thread if you'd like to show off your badge of honour.
  • Once you've threaded your needle and tied a knot at the end, start from the inside of the garment to hide the knot. Bring the needle out from the inside, a quarter or half-inch from the tear.
  • Stitch across the tear, not along it. Imagine you're making little bridges across a river. Make sure to keep the stitches small and tight.
  • When you reach the end of the tear, make a few extra stitches to secure it. Then, make a small knot and cut the thread.

Sew a button

  • Gather your materials: you'll need a needle, thread, and of course, a button. We recommend the four-hole kind for extra thread attachment.
  • Thread your needle and tie a knot at the end. Double up for extra strength.
  • Line up the button in the right spot. It's usually pretty obvious where it should go.
  • Bring the needle up from the back of the fabric, through one hole of the button. Now go back down through the opposite hole. Repeat this a few times.
  • If your button has four holes, simply repeat the step above with the other two holes.
  • When you're done, secure it by making a couple of small stitches in the fabric under the button. Tie a knot, and cut the thread.

Darn a sock

An easy-to-follow guide to get your favourite pair back on your feet:

  • Grab a needle, some thread, and something to place inside your sock to hold it in the right position as you're stitching. This could be a lightbulb, tennis ball or another rolled up sock - feel free to get creative.
  • Thread your needle, tying a knot at the end.
  • Start a little way from the hole and begin weaving the thread back and forth, covering the hole, making a nice little patch of new fabric.
  • Once you've covered the hole, keep going a bit more to reinforce the area around it.
  • Secure your work with a knot, then cut the thread.

And there you have it - now you're ready to mend your garments like a pro. This guide covers some of the basic and common mends that you might need. Dealing with bigger rips and tougher materials might require professional attention.

We are currently developing our Repairs Programme to ensure all our pieces are kept looking their best. Sign up to our newsletter so you'll be first to know when we launch it.

How to repair your down jacket

Even the toughest down jackets can take a hit - whether it’s a rogue branch on the trail or a sharp edge on farm. That’s why we’ve included a built in ‘repair kit’ in your jacket’s inner pocket, so you can fix snags or tears and keep your insulation protected.

Here’s how to repair your jacket quickly and effectively - no sewing required.

WHAT’S IN THE KIT

✔️ Durable, repair patch

✔️ Designed to bond securely with heat

✔️ Blends in with your jacket’s outer shell

✔️ Built to last through wash and wear

BEFORE YOU START

▶ Find a flat, clean surface to work on

▶ Inspect the tear - if down is poking out, gently tuck it back inside

▶ Wipe the area clean with a damp cloth and let it dry completely


STEP 1: Cover the Tear

    • Make sure the patch fully covers the damaged area with room to spare


STEP 2: Place & Protect

    • Peel off the opaque paper film
    • Lay the patch shiny adhesive-side down over the tear
    • Cover with a thin cloth or tea towel to protect your jacket from direct heat


STEP 3: Apply Heat

    • Use a hot, dry iron (no steam) temperature around 120 degrees
    • Press firmly over the cloth for 10-15 seconds
    • Let the area cool completely before testing the bond


STEP 4: Go Again (Optional)

    • If the patch lifts at the edges, repeat with more heat and pressure
    • Avoid washing for 24 hours to allow full adhesion


Pro Tip: A good repair adds character - and extends the life of your gear. Taking care of your down jacket helps reduce waste and keeps you warmer for longer.